Slimeline Pen, 3D printer style
Jassper
Company
The MakerHive
| Filename | Downloads | Size | Uploaded | |
|---|---|---|---|---|
| Slim_Type1.stl | 2922 | 1.5 MB | on 17/3/17 | Download |
| Slim_Type2.stl | 2956 | 2.2 MB | on 17/3/17 | Download |
| Slim_Type3.stl | 2912 | 1.8 MB | on 17/3/17 | Download |
| Slim_Type4.stl | 2863 | 254 kB | on 17/3/17 | Download |
| Pen_14_1703.jpg | 2837 | 116 kB | on 17/3/17 | Download |
| pen_15a.jpg | 0 | 113 kB | on 17/3/17 | Download |
| pen_15_1703.jpg | 2039 | 124 kB | on 17/3/17 | Download |
Description
7mm Pen blank for a Slimline / Funline style pen Kit.
Instructions
The ID hole is sized to fit snug on a 7mm Pen tube. Not all printers print at the exact same measurements. If yours is too tight or too loose, then scale the STL by 0.1 +/- or so to get a good fit. Squaring to the tube is recommended.
License
Attribution - Creative Commons
Comments
Sign in to add a comment.