Nozzle ID clips for the Artemis 300
geneb
| Filename | Downloads | Size | Uploaded | |
|---|---|---|---|---|
| artemis arm 0.15 label.stl | 1860 | 49 kB | on 23/2/18 | Download |
| artemis arm 0.25 label.stl | 1794 | 60 kB | on 23/2/18 | Download |
| artemis arm 0.30 label.stl | 1869 | 75 kB | on 23/2/18 | Download |
| artemis arm 0.35 label.stl | 1918 | 70 kB | on 23/2/18 | Download |
| artemis arm 0.40 label.stl | 1880 | 55 kB | on 23/2/18 | Download |
| artemis arm 0.50 label.stl | 1910 | 66 kB | on 23/2/18 | Download |
| artemis arm 0.60 label.stl | 1911 | 68 kB | on 23/2/18 | Download |
| artemis arm 0.80 label.stl | 1819 | 83 kB | on 23/2/18 | Download |
| artemis arm blank label.stl | 1761 | 8 kB | on 23/2/18 | Download |
| DSC_7103.jpg | 1819 | 2.4 MB | on 23/2/18 | Download |
| DSC_7106.jpg | 1809 | 2.4 MB | on 23/2/18 | Download |
Description
If you get tired of turning your head upside down to count the dots on the nozzle or you can't remember what nozzle is on the machine, you can print one of these! The clips are designed to snugly fit the Artemis 300 arm in the center of the arm.
Instructions
Rotate the model so the text is face up and print with support. The lettering looks much better when printed with a 0.4mm nozzle. The examples shown in the photos were printed with a 0.5mm nozzle.
After printing, use a paint pen with a contrasting color to highlight the nozzle size text.
License
Attribution - Non-Commercial - Creative Commons
Comments
Sign in to add a comment.